Sony DCR-TRV39 - Manual (Page 234)

Introduction
Chapter 1 Before Use
Chapter 2 Capture Environment
Chapter 3 Album Environment
Chapter 4 Movie Editing
Environment
Chapter 5 Layout Environment
Chapter 6 Image Editor
Chapter 7 Video Disc
Environment
Chapter 8 ImageMixer Easy
Video CD (Win)
Creating Video CD easily
Option Settings
Creating Video CD easily
ImageMixer Easy Video CD (Easy Video CD) is a wizard-based program that lets you easily
create Video CD from tape in a video camera connected through a USB cable.
Important
Please make sure the drive you are using is functioning properly before creating a Video CD.
1. Connect the video camera to your PC and insert a blank disk in the drive. At this
time, set the video camera to Video mode.
2. When you start Easy Video CD , the following screen is displayed. Select the
connected drive.
3. Select the speed for writing to the disk.
In cases where the drive has a slow transfer speed (e.g., if it is connected through a
USB cable), writing to the disk may not work properly if the speed setting is too
high. Therefore, the speed should be set to the setting recommended by the drive
manufacturer.
4. Click the "Option" button to set options .
5. Click the "Start" button.
The screen shown below is displayed, and the process of downloading video from the
video camera's tape starts automatically.