Connecting a tv monitor (display) – Sony VGC-RB51M User Manual
Page 53
Connecting a TV monitor (display)
1.
Connect the video connector end of the video cable adapter to the TV Out (S-video/video) jack on the back panel
of your computer.
2.
Connect the jack end of the video cable adapter to either end of a video cable (optional). Connect the other end
of the video cable to the Video-In jack on your TV monitor or display, located on either the side or back of your TV
monitor/display.
3.
Connect the single-jack end of an audio cable (optional) to the Headphones jack located on the back panel of
your computer. Connect the double-jack end of the audio cable to the Audio-In (L/R) on your TV monitor or
display. (The Audio-In jacks may be located on the side or rear of your TV monitor/display.)
Connecting a TV m onitor or display
The video cable adapter is not necessary, if you use an S-video cable to connect your TV to the computer's TV out
(S-video/video) jack.
Page 53