Sony HDR-UX1 - Manual (Page 45)

45
Shoo
ting
z Tips
• When the POWER switch is set to
(Movie), the size of still images becomes
2.3M (16:9 wide) or 1.7M (4:3).
• You can record still images during recording
standby in the same way as when the POWER
switch is set to
(Still). You can also record
with the flash.
Set the NIGHTSHOT switch to ON. (
appears.)
b Notes
• The NightShot and Super NightShot functions
use infrared light. Therefore, do not cover the
infrared port with your fingers or other objects.
and remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 94)
when it is hard to focus automatically.
• Do not use the NightShot and Super NightShot
functions in bright places. This may cause a
malfunction.
z Tips
• To record an image brighter, use Super
NightShot function (p. 97). To record an image
more faithfully to the original colors, use Color
Slow Shutter function (p. 96).
To adjust the exposure for backlit subjects,
press BACK LIGHT to display .. To
cancel the back light function, press BACK
LIGHT again.
Open the LCD panel 90 degrees to the
camcorder (1), then rotate it 180 degrees
to the lens side (2).
z Tips
• A mirror-image of the subject appears on the
LCD screen, but the image will be normal when
recorded.
Recording in dark places
(NightShot)
Infrared port
Adjusting the exposure for
backlit subjects
Recording in mirror mode
Continued ,