Sony VGX-XL2 User Manual
Page 164
VGX-XL2A Digital Living System
161
Event:
The screen is dark
Comment:
•
Adjust the brightness of TV. Adjusting the brightness will vary depending
on the type of TV. For details, please refer to the TV users manual.
•
Verify if other inputs on the TV are dark, if they are please refer to the TV
user manual
Event:
Pictures on the TV screen are distorted
Comment:
•
Confirm that this device and the display device are properly connected.
•
When the TV is connected using a Digital video cable, make sure to use
an output format that matches the Digital terminal of the TV you are using.
•
When the TV is connected using a component cable, make sure to use a
resolution that matches the component input of the TV you are using.
Event:
Part of the top, bottom, left or right of the screen is not displayed when the TV
is displayed.
Comment:
Adjust the over scan width using the over scan adjustment on the nVideo
graphic card’s Properties dialog box. For additional information, see the
nVideo user guide.
Event:
Part of the top, bottom, left or right of the screen is not displayed and is black.
Comment:
Adjust the over scan width using the over scan adjustment on the nVideo
graphic card’s Properties dialog box. For additional information, see the
nVideo user guide.
App F Troubleshooting.fm Page 161 Thursday, December 22, 2005 1:17 PM