Sony VGX-XL2 - Manual (Page 173)

170 VGX-XL2A Digital Living System
4 Click OK and close the screen.
Event:
This device can't communicate with the wireless LAN access point (can't
access the Internet)
Comment
• Check the items in "Can't use the wireless LAN" above.
• Make sure that the power is turned on to the wireless LAN access point.
• Check the settings for the wireless LAN access point.
Refer to the Appendix A: Wireless Local AreaNetwork in this guide.
• Check if this device and the wireless LAN access point are connected.
Refer to the Appendix A: Wireless Local AreaNetwork in this guide.
• The communication distance between the devices varies depending on
the actual distance between the communication devices, the surrounding
environment such as obstacles, the equipment configuration, the radio
wave condition, the presence of walls, materials, and software used, etc.
Move the location of this device or the wireless LAN antenna for this
device, or bring both communication devices closer together.
Check if the wireless LAN access point displays in the "Choose a wireless
network" list on the "Wireless Network Connection" screen.
1 Click Start on the Windows taskbar and then click Control Panel. The
Control Panel screen displays.
2 From the Category view, click Network and Internet Connections.
3 Click Network Connections. The Network Connections screen displays.
4 Right click Wireless Network Connections and click Display Wireless
Network to use. The Wireless Network Connection screen displays.
5 Check if the wireless LAN access point displays in the Choose a Wireless
Network screen.
The network key entered may be wrong. Once the network key is set it is
displayed with "*" for security purposes and you can't read it. Re-enter the
security key. Follow the procedure.
1 Click Start on the Windows taskbar and then click Control Panel. The
Control Panel screen displays.
App F Troubleshooting.fm Page 170 Thursday, December 22, 2005 1:17 PM