Sony VGX-XL2 - Manual (Page 133)

VGX-XL2A Digital Living System 130
5 When the restore completes, the screen Restore C: Drive
(Step 4 of 4) appears. Check for active program installation windows. Follow
the on-screen instructions to complete the installation for that specific
program. Continue until all active program windows are gone.
6 Click Finish to exit VAIO Recovery and restart your computer. When your
computer restarts, you are guided through a series of screens for Windows
set up. Follow the on-screen instructions.
This completes the VAIO Recovery option of Restore C: Drive.
Restore Complete System
The Restore Complete System option restores the entire main hard drive to
its original factory configuration. The time to complete the restore can vary
depending on the amount of software being restored and the speed of your
computer.
WARNING - Restore Complete System deletes all personal files and settings,
and any software installed after the purchase of the computer.
• This option is primarily for the following reasons:
• The main hard disk is replaced
• Change or modification of a RAID array configuration
• Restore the recovery drive partition on the main hard disk
The Restore Complete System main screen contains the following three links
if you start your computer from Windows:
Go to Restore C: Drive - Restores only the C: drive to its original factory
configuration. This provides you with a less invasive option than restoring
your complete system.
Restart from disc - Starts the Restore Complete System process using the
recovery discs.
Go to Create recovery discs - Allows you to create recovery discs if you
have not done so previously, or have not purchased a set of recovery discs.
Note: If you restart your computer from the recovery discs or from using the
F10 key, only the Go to Restore C: Drive link displays.
Note : A set of recovery discs are required to begin Restore Complete
System.
App D HDD Rec.fm Page 130 Thursday, December 22, 2005 1:13 PM