Sony DSC-T33 - Manual (Page 64)

64
DSC-T3/T33 2-548-269-11(1) [OpenType FONT]
1st image (shifted in the
+ direction)
2nd image (appropriate
exposure for the camera)
3rd image (shifted in the
– direction)
 Set the mode switch to .
 Press MENU.
The menu appears.
 Select [Mode] (REC Mode)
with /, then select [Exp
Brktg] with /.
 Select [BRK] (Bracket Step)
with /, then select the
desired exposure adjustment
value with
/.
±1.0EV: Shifts the exposure value by
plus or minus 1.0EV.
±0.7EV: Shifts the exposure value by
plus or minus 0.7EV.
±0.3EV: Shifts the exposure value by
plus or minus 0.3EV.
 Shoot the image.
To return to normal mode
Select [Normal] in step
.
• You cannot use the flash in this mode.
• The focus and white balance are adjusted for
the first image, and these settings are also used
for the other images.
• When the exposure is manually adjusted
(page 60), the exposure is shifted based on the
adjusted brightness.
• The recording interval is approximately 0.36
second.
• If the subject is too bright or too dark, you may
be unable to shoot properly with the selected
bracket adjustment value.
• You may not be able to shoot images in
Exposure Bracket mode depending on the
Scene Selection mode (page 43).