Step 1 preparing the power source, Installing the battery pack – Sony DCR-PC105 User Manual
Page 15
Advertising
15
Getting Started
Installing the battery pack
Be sure to set the POWER switch to OFF (CHG) when replacing the battery pack.
(1) While sliding the BATT (battery) release lever in the direction of the arrow 1,
slide the battery terminal cover in the direction of the arrow 2.
(2) Slide the battery pack down until it clicks.
To remove the battery pack
Remove the battery pack while sliding the BATT (battery) release lever.
1
Step 1 Preparing the power source
BATT release lever
2
1
2
Advertising