Sony DCR-PC105 - Manual (Page 50)

50
Recording still images on a “Memory Stick” during tape recording
standby or tape recording
During tape recording
The POWER switch should be set to .
Press PHOTO deeper.
The image displayed on the screen when you pressed PHOTO deeper will be recorded
on the “Memory Stick.”
Recording on the “Memory Stick” is complete when the bar scroll indicator disappears.
Note
You cannot record still images on a “Memory Stick” while using the following functions
(The
indicator flashes):
– End search
– Wide mode
– While fading in with BOUNCE
– MEMORY MIX
“Memory Stick”
See page 112 for details.
Still images
•The image size will be 640
× 480.
•If the POWER switch is set to CAMERA, image quality cannot be changed. Images
will be recorded with image quality as set when the POWER switch is set to
MEMORY. (The default setting is FINE.)
To record images with higher image quality, use of memory photo recording is
recommended (p. 120).
Recording with the flash
During recording standby, you can record still images on the “Memory Stick” with the
flash. See page 124 for details.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
To record still images on the “Memory Stick” during tape recording
You cannot check an image on the screen by pressing PHOTO lightly.
During and after recording still images on the “Memory Stick”
Your camcorder continues recording on the tape.
Title
You cannot record titles.
Self-timer recording
During recording standby, you can record still images on the “Memory Stick” with the
self-timer. See page 52 for details.