Quick start guide, Recording on tape, Quick start guide – recording on tape – Sony DCR-PC105 User Manual

Page 8: Connecting the power cord, Inserting the cassette 2

Advertising
background image

Quick Start Guide

8

Quick Start Guide – Recording on tape

Connecting the power cord

Use the battery pack when using your camcorder outdoors (p. 15).

To eject the cassette

Follow the procedures above, and take out the cassette after the cassette compartment opens
completely in step 2.

Note
Do not press the cassette compartment down forcibly. Doing so may cause a malfunction.

Inserting the cassette

2

Push the center of the
cassette back to insert
the cassette. Insert the
cassette straight as far as
possible into the cassette
compartment with the
window facing up.

3

Close the cassette
compartment by
pressing

on the

cassette compartment.
After the cassette
compartment goes
down completely, close
the lid until it clicks.

How to hold your camcorder

Connect the plug with its v mark facing the
grip belt.

Open the
jack cover.

1

2

AC Adaptor (supplied)

3

Hold the camcorder, putting your wrist
through the belt and your fingers lightly on
the finger rest (p. 21).

Finger rest

1

Slide OPEN/ZEJECT
in the direction of the
arrow and open the lid.

Advertising