Control instructions, Dual digital timer control – Alliance Laundry Systems Dryer Tumblers User Manual

Page 26

Advertising
background image

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT

Installation/Operation Supplement

70392201 (EN)

24

Control Instructions

Dual Digital Timer Control

QT Control Suffix

1. Select HIGH, MED, LOW or NO HEAT by

turning the temperature knob.

Figure 4

2. Set the HEAT TIME for the number of minutes

(from 0-60) desired.

Figure 5

3. Set the COOL DOWN TIME for the number of

minutes (from 0-15) desired.

Figure 6

4. Press and release START button to start tumbler.

Display will show minutes remaining before end
of cycle.

IMPORTANT: To stop the tumbler at any time
during the cycle, OPEN DOOR. If the loading door
or lint panel door is opened during the cycle, the
heating system will shut off and the motor will stop.
To restart the cycle, both doors must be closed and
the START button must be pressed in.

5. When the cycle is complete, open door and

remove the laundry.

TMB2147N

TMB2148N

TMB2149N

TMB2150N

Figure 7

Advertising