Sony VGN-TXN29N - Manual (Page 11)

9
US
Inserting/Removing a Memory Stick Media
Your computer is equipped with a Memory Stick PRO/Duo media slot on the front.
You can only insert one Memory Stick media at a time.
To insert a Memory Stick media
1 Insert the Memory Stick media with the arrow facing upward and pointing
toward the Memory Stick PRO/Duo media slot.
2 Carefully slide the Memory Stick media into the slot until it clicks into place.
Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you
insert it into the slot. To avoid damaging your computer or the Memory Stick media, do not force
the Memory Stick media into the slot if you cannot insert it smoothly.
Do not insert more than one Memory Stick media into the slot. Improper insertion of the media
may damage both your computer and the media.
Your computer supports Memory Stick Duo media and is equipped with the Memory Stick
PRO/DUO media slot that is compatible with both standard- and duo-size media.
You can insert a Memory Stick Duo media directly into the slot.
To remove a Memory Stick media
1 Make sure that the Media Access indicator is off.
2 Push the Memory Stick PRO/Duo media in toward the computer.
The Memory Stick media ejects.
3 Pull the Memory Stick media carefully out of the slot.
Always remove the Memory Stick media gently, or it may pop out unexpectedly.
Do not remove the Memory Stick media while the Media Access indicator is turned on. If you do,
you may lose data. Large volumes of data may take time to load, so be sure the indicator is off
before removing the Memory Stick media.