Sony VGN-TXN29N - Manual (Page 12)

10
Inserting/Removing an SD Memory Card
In addition to the Memory Stick PRO/Duo media slot, your computer is equipped
with an SD memory card slot on the front to accommodate the SD memory card.
To insert an SD memory card
1 Locate the SD memory card slot on the front of the computer.
2 Insert the memory card into the slot with the arrow facing upward and
pointing toward the slot.
3 Carefully slide the memory card into the slot until it clicks into place.
Do not force the card into the slot.
If the SD memory card does not go into the slot easily, remove it gently and verify you are
inserting it in the proper direction.
To remove an SD memory card
1 Make sure that the Media Access indicator is off.
2 Push the extended part of the SD memory card in toward the computer.
The memory card ejects.
3 Pull the memory card carefully out of the slot.
Do not remove the SD memory card while the Media Access indicator light is turned on. If you
do, the card or its data may become damaged.