Connecting a projector – Sony VGN-UX180P User Manual
Page 76
Advertising
76
Using Peripheral Devices
Connecting a Projector
You need the supplied port replicator or display/LAN adapter to connect a projector (for example, the Sony LCD projector) to
your computer.
To connect a projector
1
Connect the power cord (1) of the projector into an AC outlet.
2
Plug the RGB signal cable (2) into the monitor (VGA) port (3)
a
on the port replicator or on the display/LAN adapter.
3
Plug the audio cable (4) (not supplied) into the headphones jack (5)
i
.
4
Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).
Advertising