Sony DSC-F88 - Manual (Page 14)

14
Using the AC Adaptor
, Open the DC IN jack cover,
then connect the AC Adaptor
(supplied) to the DC IN jack of
the camera.
Open the cover in the arrow direction as
illustrated above.
Connect the DC plug
with the v mark facing the LCD screen
side .
• Connect the AC Adaptor to an easily accessible
wall outlet (wall socket) close by. If some
trouble occurs while using the adaptor,
immediately shut off the power by
disconnecting the plug from the wall outlet
(wall socket).
1
AC Adaptor
DC plug
DC IN jack cover
, Connect the power cord (mains
lead) to the AC Adaptor and to
a wall outlet (wall socket).
• When you have finished using the AC Adaptor,
disconnect it from the DC IN jack of the
camera and from a wall outlet (wall socket).
• The set is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet (wall socket), even if the unit itself
has been turned off.
2
2 To a wall outlet
(wall socket)
Power cord
(mains lead)
1
Using your camera
abroad
Power sources
You can use your camera in any country or
region with the AC Adaptor (supplied)
within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor
[a] , if necessary, depending on the design of
the wall outlet (wall socket) [b] .
• Do not use an electrical transformer (travel
converter), as this may cause a malfunction.
AC-LS5/LS5B