Performing initial setup operations 14, Performing initial setup operations, Hooking up and setting up the speaker system – Sony STR-K502P User Manual

Page 14: Turn off the receiver, Demonstration mode

Advertising
background image

14

Hooking Up and Setting Up the Speaker System

Performing Initial Setup Operations

Once you have hooked up the speakers and turned on the
power, clear the receiver’s memory. Then specify the
speaker parameters (size, position, etc.) and perform any
other initial setup operations necessary for your system.

Clearing the receiver’s memory

Before you use your receiver for the first time or when
you want to clear the receiver’s memory, do the following.
This procedure is not necessary if the demonstration
activates when you turn the power on.

1

Turn off the receiver.

2

Hold down ?/1 for four seconds.
The currently selected function, then the
demonstration message appears in the display and the
items including the following are reset or cleared:
• All preset stations are reset or cleared.
• All sound field parameters are reset to their factory

settings.

• All index names (of preset stations and program

sources) are cleared.

• All adjustments made with the SET UP button are

reset to their factory settings.

• The sound field memorized for each program source

and preset stations are cleared.

Performing initial setup operations

Before you use your receiver for the first time, use the SET
UP button to adjust settings to correspond to your system.
You can set the following items. For details on how to
adjust each setting, see the page in parentheses.
• Speaker size and placement (page 15).
• Speaker distance (page 17).
• Select the MULTI CH IN video signal (page 43).
• Whether the display turns off or not when you press

DIMMER (page 43).

1/u

MULTI CHANNEL DECODING

INPUT MODE

MUTING

VIDEO

MD/TAPE

DVD/LD

CD

TV/SAT

TUNER

AUX

DISPLAY

DIMMER

PHONES

SPEAKERS

?

/

1

MEMORY

SHIFT

FM MODE

FM

AM

EQ

SURR

LEVEL

SET UP

NAME

A

ENTER

A.F.D.

SOUND FIELD

MULTI CH IN

EQUALIZER

CINEMA STUDIO EX

MODE

2CH

PRESET
TUNING

TUNING

+

+

B

C

MASTER VOLUME

+

Demonstration Mode

The demonstration will activate the first time you turn on
the power. When the demonstration starts, the following
message appears in the display:

“NOW DEMONSTRATION MODE IF YOU FINISH
DEMONSTRATION PLEASE PRESS POWER KEY
WHILE THIS MESSAGE APPEARS IN THE DISPLAY
THANK YOU”

To cancel the demonstration

Press ?/1 to turn the receiver off while the above message
is being displayed. The next time you turn the receiver on,
the demonstration will not appear.

To view the demonstration

Hold down SET UP and press ?/1 to turn on the power.

Notes

• Running the demonstration will clear the receiver’s

memory. For details on what will be cleared, see
“Clearing the receiver's memory” on this page.

• There will be no sound when the demonstration mode is

activated.

• You cannot cancel demonstration if you did not press

?/1 while the above message is being displayed. To
cancel demonstration after the above message appears,
press ?/1 twice to activate the demonstration again.
Then, press ?/1 while the above message is being
displayed.

Advertising