Programming a cooking program – Alto-Shaam ECOSMART AR-7EVH User Manual

Page 17

Advertising
background image

o p E r a t I n G I n s t r u c t I o n s

AR-7EVH Electric Rotisserie with Ventless Hood Operation & Care Manual • 15

AR-7EVH Electric Rotisserie with Ventless Hood Operation & Care Manual • 15

The Alto-Shaam rotisserie provides the operator with the ability to set as many as seven cooking programs.

Each cooking program can be preset to include all cooking and holding functions. Cooking programs are

stored and recalled using the P

RESET

Keys labeled 1 through 7.

PROGRAMMING A COOKING PROGRAM:

With the rotisserie oven in the “

OFF

” position, determine the food product procedure to be

programmed. Press and release control

ON

/

OFF

key. The oven will beep for one second and power

to the unit will be indicated by an illuminated green indicator light located in the upper left corner

of the O

N

/O

FF

key. The oven will begin operating in the hold mode. The amber hold indicator

will be illuminated and the last set hold temperature will be displayed.

Select a number for the programmed product. Press and hold the selected P

RESET

number key

until you hear an audible signal which will occur within 3 seconds. The number key program

indicator light will illuminate. The programmed product is now stored in memory on the

specific number key selected.

NOTE: The last PRESET Key programmed will be the oven cooking run sequence for the next product

to be programmed. Settings can be manually changed for the next product and an alternate pre-

programmed letter key selected.

TO COOK WITH PRESET MENU KEYS:

PRESS AND RELEASE CONTROL

ON

/

OFF

KEY.

• The control will beep and the green indicator light on the

ON

/

OFF

key will illuminate.

• The amber hold indicator will illuminate.

• The oven will begin operating in the hold mode.

• The previously set hold temperature will be displayed.

• The green indicator will illuminate on all programmed

PRESET

Keys.

PRESS DESIRED PRESET KEY (1

THROUGH

7)

• The Pre-Heat indicator will illuminate.

� The rotisserie oven will automatically preheat to the cooking temperature programmed.

• The oven will beep when preheated and the preheat indicator will go out.

• Both the Ready and Start indicator lights will flash.

� The set cook temperature will be maintained by the oven and appear in the display

while in the ready/start mode.

NOTE: Presets cannot be modified once selected. If a modification is desired, the preset must be

erased and re-saved.

LOAD THE PREPARED PRODUCT SPITS INSIDE OVEN AND CLOSE THE OVEN DOOR.

PRESS AND RELEASE THE START KEY.

NOTE: The rotisserie will beep 4 times when cooking is finished.

p r E s E t M E n u k E y o p t I o n

ENTER ALL COOKING AND HOLDING PARAMETERS FOR THE

PRODUCT SELECTED AS INSTRUCTED ON THE PREVIOUS PAGE.

Advertising