Sony DAV-X1 - Manual (Page 21)

Getting Star
ted
21 US
A To connect to a TV with the VIDEO IN jacks
Connect the video cord.
B To connect to a TV with the S VIDEO IN jack
Connect an S video cord (not supplied). When using the S video jack instead of the video jacks, your
TV monitor must also be connected via an S video jack. S video signals are on a separate bus from the
video signals and will not be output through the video jacks.
C To connect to a TV with the COMPONENT VIDEO IN jacks
Connect a component video cord (not supplied). To use the COMPONENT VIDEO OUT jacks (Y, P
B
/
C
B
, P
R
/C
R
) instead of the video jacks, your TV monitor must be equipped with via COMPONENT
VIDEO IN jacks (Y, P
B
/C
B
, P
R
/C
R
). If your TV accepts progressive format signals, you should use this
connection and set the output channel of the system to progressive format (page 22).
D To connect to a TV with the HDMI/DVI (digital visual interface) input
jack
Use a certified HDMI cord (not supplied) to enjoy high quality digital picture and sound through the
HDMI OUT jack. Note that Super Audio CD sound is not output from the HDMI OUT jack.
To connect to a TV with DVI input
Use an HDMI-DVI converter cord (not supplied) with an HDMI-DVI adaptor (not supplied). The DVI
jack will not accept any audio signals. Furthermore, you cannot connect the HDMI OUT jack to DVI
jacks that are not HDCP (high-bandwidth digital content protection) compliant (e.g., DVI jacks on PC
displays).
• Only when DVD function is selected (by pressing FUNCTION repeatedly until “DVD” appears in the front panel
display), the COMPONENT VIDEO OUT jacks output video signals, and the HDMI OUT jack outputs video/audio
signals (HDMI audio out default setting is OFF).
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen.
To change the aspect ratio, see page 77.
Note
Yellow
Green
Blue
Red
continued