Sony DAV-X1 - Manual (Page 70)

70 US
3
Press X / x repeatedly until “SET
VIDEO1” blinks in the front panel
display, then press ENTER or
c .
4
Press X / x to select “SET SAT1”
(“SAT1” blinks) in the front panel
display.
The input sensitivity is lowered.
5
Press ENTER or AMP MENU.
The AMP MENU turns off.
• When connecting a component to the VIDEO
2/SAT 2 jack, select “VIDEO2” in step1,
“SET VIDEO2” in step 3, and “SET SAT2” in
step 4.
• If you select “SET VIDEO1(2)” in step 4, the
operation is canceled and the mode display
(the mode of the system in step 1) remains as
“VIDEO1(2).”
You can enjoy multiplex broadcast sound when
the system receive the AC-3 multiplex broadcast
signal.
You can play bilingual broadcasts recorded on
DVD-RWs in VR mode.
• To receive the AC-3 signal, you need to connect a
digital satellite tuner to the system with an optical
cable or coaxial cable (page 27) and set the digital
output mode of the digital satellite tuner to
AC-3 .
• When you using HDMI audio output, the system
always outputs “MAIN” sound regardless of the
“DUAL MONO” setting in AMP MENU.
1
Press AMP MENU.
2
Press x/X repeatedly until “DUAL
MONO” appears in the front panel
display, then press ENTER or c.
3
Press x/X to select the sound you want.
• MAIN: main sound is output from the left
and right speakers.
• SUB: sub sound is output from the left and
right speakers.
• MAIN+SUB: main sound and Sub sound
are output from the left and right speakers.
Note
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
Note
AMP MENU
X/x/c
ENTER
With cover opened.