Sony PCG-R505DSK - Manual (Page 68)

Change text in this variable definition to document title.
68
To connect an external display to your docking station
1 Make sure the external display is plugged into an AC outlet.
2 Open the rear panel of the docking station, and locate the monitor port.
3 Plug the display cable into the monitor port.
4 Make sure the cable is connected to the external display.
5 Restart your notebook.
6 Press the key combination Fn + F7 to change the display to monitor.
7 See the manual that came with your computer display for more information
on its installation and use.
To connect a projector (such as a Sony LCD Projector) to your notebook:
1 Make sure the projector is plugged into an AC outlet.
2 Open the monitor port panel on the right side of the notebook.
3 Plug the RGB signal cable into the monitor port, and make sure it is
connected to the projector.
✍
You cannot use the monitor port on your notebook when the docking station is
connected to the notebook; however, you can use the monitor port on the docking
station.
Connecting Monitor to the Docking Station
Computer display
Power cord
Display cable (optional)