Sony VPL-HW30ES - Manual (Page 26)

26
• Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p,
DeepColor, and 3D video images may not be displayed properly.
• When connecting an HDMI cable to the projector, make sure the V mark on the upper
part of the HDMI input of the projector and the v mark on the connector of the cable is
set at the same position.
• If the picture from equipment connected to the projector with an HDMI cable is not
clear, check the settings of the connected equipment.
To connect to equipment with component video output
connectors
Notes
Component video cable (not supplied)
: Video signal flow
Equipment with component
video output connectors
Right side of the projector
AV amplifier
Speakers