Zoom, Full 1 (when a computer signal is input), Full 2 (when a computer signal is input) – Sony VPL-HW30ES User Manual

Page 34

Advertising
background image

34

• You can adjust the vertical position of the picture with “V Center” and “Vertical Size” in the

Screen

menu only when “Zoom” is selected. (

1 page 52)

• When the aspect ratio of the computer signal is 16:9 or wider, the “Wide Mode” setting is fixed at

“Full 1.”

Notes on selecting the wide screen mode

The projector is featured with the WIDE MODE. When changing the settings of WIDE
MODE, use caution as described below.
• Select the wide screen mode taking into account that changing the aspect ratio of the

original picture will provide a different look from that of the original image.

• Note that if the projector is used for profit or for public viewing, modifying the original

picture by switching to the wide mode may constitute an infringement of the rights of
authors or producers, which are legally protected.

Zoom

A 16:9 aspect ratio picture is enlarged
vertically and horizontally in the same
ratio to fill the screen. Use this mode to
view a letterbox picture or a letterbox
picture with side panels.
If the subtitle of a movie, etc. is hidden
and cannot be seen, adjust the screen with
“Vertical Size” and “V Center” to display
the subtitle. (

1 page 52)

Full 1 (When a computer
signal is input)

Displays a picture on the whole of the
screen without changing the aspect ratio
of the original picture.

Full 2 (When a computer
signal is input)

Displays a picture on the whole of the
screen.

Notes

Letterbox picture

Letterbox picture with side panels

Advertising
This manual is related to the following products: