Sony BDV-N7200W - Manual (Page 69)

69 US
BDV-N9200W/BDV-N7200W/BDV-N5200W
4-485-799-12(1)
D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200
(PMRF 01)\4485799121_US (U2)\100ADD.fm masterpage:
Right
A
d
di
tio
n
al
Inf
o
rm
at
io
n
Radio stations cannot be tuned in.
t Check that the antenna (aerial) is
connected securely. Adjust the
antenna (aerial) or connect an
external antenna (aerial) if
necessary.
t The signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual
tuning.
The disc does not play.
t The region code on the BD/DVD
does not match the system.
t Moisture has condensed inside the
main unit and may cause damage
to the lenses. Remove the disc and
leave the main unit turned on for
about half an hour.
t The system cannot play a recorded
disc that is not correctly finalized
(page 71).
File names are not displayed correctly.
t The system can only display ISO
8859-1 compliant character
formats. Other character formats
may be displayed differently.
t Depending on the writing software
used, the input characters may be
displayed differently.
A disc does not start playing from the
beginning.
t Resume play has been selected.
Press OPTIONS and select [Play
from beginning], then press
.
Playback does not start from the
resume point where you last stopped
playing.
t The resume point may be cleared
from memory depending on the
disc when
• you open the disc lid.
• you disconnect the USB device.
• you play other content.
• you turn off the main unit.
The language for the soundtrack/
subtitle or angles cannot be changed.
t Try using the BD’s or DVD’s menu.
t Multilingual tracks/subtitles or
multi-angles are not recorded on
the BD or DVD being played.
Bonus contents or other data that are
contained in a BD-ROM cannot be
played.
t Try the following:
1 Remove the disc.
2 Turn the system off.
3 Remove and reconnect the USB
device (page 33).
4 Turn the system on.
5 Insert the BD-ROM with
BONUSVIEW/BD-LIVE.
The USB device is not recognized.
t Try the following:
1 Turn the system off.
2 Remove and reconnect the USB
device.
3 Turn the system on.
t Make sure that the USB device is
securely connected to the (USB)
port.
t Check if the USB device or a cable is
damaged.
t Check if the USB device is on.
t If the USB device is connected via a
USB hub, disconnect it and connect
the USB device directly to the main
unit.
Tuner
Playback
USB device