Changing the lithium battery in the camera – Sony MVC-FD51 User Manual

Page 36

Advertising
background image

36-EN

Changing the lithium battery in the
camera

When the lithium battery becomes weak or dead, the “I” indicator
flashes on the LCD screen. In this case, replace the battery with a
Sony CR2025 or Duracell DL-2025 lithium battery. Use of any other
battery may present a risk of fire or explosion.
When installing the lithium battery, keep the battery pack attached.
Otherwise, you will need to reset the date and time retained by the
lithium battery.

1

Slide the lid of the lithium
battery compartment down
and open it.

2

Push the lithium battery once
and push it out from the
holder.

3

Install the lithium battery with
the positive (+) side facing out.

4

Close the lid.

WARNING

The battery may explode if mistreated. Do not recharge, disassemble, or
dispose of in fire.

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replace only with the same type recommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.

Advertising