Sony PEG-TH55 - Manual (Page 143)

143
Performing the HotSync
®
operation using the Bluetooth
®
function (for
models containing the Bluetooth
®
wireless technology only)
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
Tips
• The step in which the Passkey Input screen is displayed varies depending on the
mobile phone, and for some devices, the Passkey Input screen is not displayed. In
any case, follow the instructions shown on the screen and enter a Passkey when
required.
• Depending on the radio wave conditions, it may take time to complete a Bluetooth
®
compatible device discovery or establish communication.
• If it takes too long to perform a device discovery, tap [Cancel] on the Bluetooth
Discovery dialog box, and conduct a discovery again.
• If the device discovery failed in detecting a device, conduct a discovery again.
Performing the HotSync
®
operation using the Bluetooth
®
function
1
Enable the Bluetooth
®
function on your computer.
2
Check that (HotSync) is displayed in the Windows task
tray (Notification area) at the bottom right of the window on
your computer.
Tip
If (HotSync) is not displayed in the Windows task tray (Notification area), click
[Start], select [Programs] (for Windows XP, select [All Programs])-[Sony
Handheld], and click [HotSync Manager] to start the HotSync manager.
3
Tap (Home).
Tap [Applica…] when using CLIE Organizer .
4
Tap (HotSync).
The HotSync screen is displayed.
5
Check that [Local] is selected.
Continued on next page
• • • • • • • • • • • • • • • • • • •