Sony PEG-TH55 - Manual (Page 151)

151
Performing the HotSync
®
operation via a modem
Exchanging and updating files/data using the HotSync
®
operation (Other HotSync
®
operations)
3
Tap [Enter phone #] beneath the modem name.
The Phone Setup screen is displayed.
4
Adjust the following settings as needed:
A Enter the telephone number used to access the modem connected to
your computer.
B Enter a dial prefix (such as “9”) to access an outside line, and tap the
check box next to [Dial prefix:] as needed. You can also enter a
comma in the field to introduce a pause in the dialing sequence. Each
comma equals a two second pause.
C If the phone line you are using for your CLIÉ handheld has Call
Waiting, select the check box next to [Disable call waiting:] to avoid
an interruption during the modem HotSync
®
operation.
D If you want to use a calling card to place the call, select the check box
next to [Use calling card:] and enter the calling card number.
5
Tap [OK].
The HotSync screen is displayed again.
Continued on next page
• • • • • • • • • • • • • • • • • • •