Sony ICD-PX820D - Manual (Page 35)

35 GB
Ot
her
P
layb
a
ck O
per
ati
o
ns
Other Playback Operations
Changing the Playback Method
Convenient playback
methods
Listening with better sound
quality
• To listen with the headphones:
Connect the supplied or commercially
available headphones to the
i (headphone) jack. The built-in speaker
will be automatically disconnected.
• To listen from an external speaker:
Connect an active or passive speaker (not
supplied) to the i (headphone) jack.
Quickly locating the point you
wish to start playback (Easy
Search)
When “EASY-S” is set to “ON” (page 55)
in the menu, you can quickly locate the
point at which you wish to start playback by
pressing –
. or > + repeatedly during
playback.
You can go back approx. 3 seconds by
pressing –
. once, or advance approx. 10
seconds by pressing > + once. This
function is useful for locating a desired
point in a long recording.
Searching forward/backward
during playback (Cue/Review)
• To search forward (Cue):
Press and hold > + during playback and
release it at the point you wish to resume
playback.
• To search backward (Review):
Press and hold – . during playback and
release it at the point you wish to resume
playback.
The IC recorder searches at slow speed with
playback sound. This is useful to check one
word forward or back. Then, if you press
and hold the button, the IC recorder starts to
search at higher speed.
z When messages are played back
to the end of the last message
• When you play back or fast play back to the
end of the last message, “END” flashes up
for 5 seconds and the operation indicator
lights up in green. (You cannot hear the
playback sound.)
• When “END” and the operation indicator go
off, the IC recorder will stop at the beginning
of the last message.
• If you press and hold – . while “END” is
flashing, the messages are played back