Sony ICD-PX820D - Manual (Page 60)

60 GB
Connecting the IC recorder
to your computer
You can transfer the IC recorder data onto
your computer by connecting the IC
recorder to the computer.
Use the USB connecting cable supplied
with the IC recorder to connect the
(USB) connector of the IC recorder and
the USB port of your computer.
The IC recorder is recognized by the
computer as soon as the cable is connected.
You can connect or disconnect the cable
when the IC recorder and the computer are
turned on or off.
While the IC recorder is connected to the
computer, “PC LINK” is displayed in the
display window of the IC recorder.
P Notes
• If you connect more than two USB devices
to your computer, normal operation will not
be guaranteed.
• Use of this IC recorder with a USB hub or a
USB extension cable other than the supplied
cable is not guaranteed.
• A malfunction may occur depending on the
USB devices connected at the same time.
• Before connecting the IC recorder to the
computer, make sure that the batteries are
inserted in the IC recorder.
• It is recommended that you disconnect the
cable from the computer when you are not
using the IC recorder with your computer.
USB connecting
cable (supplied)
To USB
port of your
computer
To (USB)
connector of
IC recorder