Sony MVC-FD100 - Manual (Page 89)

masterpage:Right
filename[G:\_Upload\3073074111\307307411MVCFD100UC\02GB-
MVCFD100UC\09add.fm]
89
model name1[MVC-FD100/200]
[3-073-074-11(1)]
A
d
ditio
n
al
inf
o
rm
at
ion
You cannot display a print
mark. • You cannot display print marks on moving images,
text images and Clip Motion images.
The picture is noisy. • Your camera is placed near a TV or other
equipment that uses strong magnets.
t Move your camera away from the TV, etc.
The picture is too dark. • You are shooting a subject with a light source
behind the subject.
t Adjust the exposure (page 67).
• The brightness of the LCD screen is too low.
t Adjust the brightness of the LCD screen
(page 20).
The flash does not work. • The flash is set to .
t Set the flash to (no indication), , or
(page 22).
• The camera is in one of the following PROGRAM
AE modes: Twilight, Twilight plus, or Landscape.
t Cancel the PROGRAM AE function or set the
flash to
(pages 22, 65).
• The PLAY/STILL/MOVIE selector is set to
MOVIE.
t Set it to STILL.
The date and time are
recorded incorrectly. • The date and time are not set correctly.
t Set the correct date and time (page 14).
Vertical streaks appear
when you are shooting a
very bright subject. • This is called the smear phenomenon.
t This is not a malfunction.
The zoom does not work. • PROGRAM AE is set to the Panfocus mode.
t Cancel the Panfocus mode (page 65).
Digital zoom does not
work. • You cannot use digital zoom when recording
moving pictures.
• Digital zoom is set to [OFF].
t Set digital zoom to [ON] at the menu.
The image is in
monochrome. • You shot the image in TEXT mode.
t Cancel the TEXT mode (page 62).
• The picture effect is set to B&W.
t Cancel the B&W mode (page 69).
The image cannot be
played back on a
computer. t Consult the computer or software manufacturer.
Symptom Cause and/or Solution
01cov.book Page 89 Thursday, November 29, 2001 1:20 PM