Sony MVC-FD100 - Manual (Page 17)

masterpage:Right
filename[D:\WORKS\Mavica\2nd\3066742111MVCFD92UC\02GB-
MVCFD92UC\03pre.fm]
Getting
sta
rted
17
model name1[MVC-FD92]
[3-066-742-12(1)]
Inserting a “Memory Stick”
See page 85 for details about “Memory Stick”.
Open the “Memory Stick” cover, then push the “Memory Stick” once lightly.
Notes
• Insert the “Memory Stick” firmly until it clicks, otherwise a message such as “MEMORY
STICK ERROR” will be displayed.
• If the access lamp is lit, data is being read or written. Never remove the “Memory Stick,” turn
off the power, or change the setting of the MS/FD selector while the access lamp is lit.
Otherwise, the image data could be damaged or lost.
• You cannot record or edit images on a “Memory Stick” if the write-protect switch is set to the
LOCK position.
The position and shape of the write-protect switch may differ depending on the types of
“Memory Stick” used.
1 Open the “Memory Stick” cover.
2 Insert the “Memory Stick.”
Insert the “Memory Stick” with the B mark facing toward the “Memory Stick”
slot as illustrated until it clicks.
3 Close the “Memory Stick” cover.
Removing the “Memory Stick”
1 2 3
“Memory Stick” cover
LOCK
Connector
Write-protect
switch
Label space
01cov.book Page 17 Thursday, November 29, 2001 1:20 PM