Sony HT-C800DP User Manual

Page 28

Advertising
background image

HT-C800DP 4-247-292-11(1)

28

GB

5

Press ENTER.

The station is stored.

6

Repeat 1 to 5 to store other stations.

To tune in a station with a weak signal

Press TUNING +/– repeatedly in 2 to tune in the station manually.

To change the preset number

Start over from 1.

To change the AM tuning interval (Except for European and Mexican models)

The AM tuning interval is factory set to 9 kHz (10 kHz in some areas).
To change the AM tuning interval, tune in any AM station first, then turn off the system by
pressing [/1 on the remote or on the system. While holding down x on the system, turn on the
power by pressing [/1 on the remote or on the system. When you change the interval, AM
preset stations will be erased.
To reset the interval, repeat the same procedure.

FM

ST

MHz

v

Advertising