Sony DCR-TRV38 User Manual
Page 120
120
Recording a moving picture from other equipment
You can use either A/V connecting cable or i.LINK cable. Connect the devices as
illustrated on page 86.
When connecting with the A/V connecting cable, set DISPLAY in
to LCD in the
menu settings. (The default setting is LCD.)
The POWER switch should be set to
.
(1) Play back the recorded tape on the VCR, or turn the TV on to see a desired
program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
(2) Press START/STOP at the scene where you want to start recording from.
Note
In the following instances, recording may stop in the middle, or distorted images may
be recorded:
– If the tape has a blank portion
– If recording from a tape in a poor condition, such as one that has been reused often for
recording
– If the input signal is cut off
Recording a picture from tape as a moving picture