Sony DCR-TRV38 - Manual (Page 29)

29
Recording – Basics
After recording
(1) Set the POWER switch to OFF (CHG).
(2) Close the LCD panel.
(3) Eject the cassette.
(4) Remove the power source.
Adjusting the LCD screen
When you adjust the LCD panel, make sure if the LCD panel is opened up to 90
degrees.
Note
When using the LCD screen except in the mirror mode, the viewfinder automatically
turns off.
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to your camcorder body with the
LCD screen facing out.
Recording a picture
180
°
90
°