Sony DCR-TRV38 - Manual (Page 19)

19
Getting Started
Checking status of battery pack – Battery Info
(1) Set the POWER switch to OFF (CHG).
(2) Press OPEN to open the LCD panel.
(3) Press DISPLAY/BATTERY INFO.
The battery charge level (the percentage of remaining battery time) and
remaining battery time when using the LCD screen or viewfinder are
displayed for about seven seconds.
If you keep pressing DISPLAY/BATTERY INFO, the Battery Info is displayed
for up to about 20 seconds.
Note
The BATTERY INFO indicator is not displayed in the following cases:
– The battery pack is not properly installed.
– Something is wrong with the battery pack.
– The battery pack is fully discharged.
Battery Info
The number displayed as Battery Info is the approximate recording time.
While the remaining battery time is being calculated
“CALCULATING BATTERY INFO...” is displayed.
Step 1 Preparing the power source
3
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN
VIEWFINDER :
: 52
72 min
min
0% 50% 100%
BATTERY INFO
BATTERY CHARGE LEVEL
REC TIME AVAILABLE
LCD SCREEN
VIEWFINDER :
: 65
90 min
min
0% 50% 100%
DISPLAY/
BATTERY INFO
During charging Fully charged