Sony DCR-TRV38 - Manual (Page 102)

102
Selecting still image quality
The default setting is FINE.
The POWER switch should be set to or .
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select STILL SET in
, then press EXEC (p. 171).
(4) Select QUALITY, then press EXEC.
(5) Select a desired image quality, then press EXEC.
Setting Meaning
FINE (FINE) Use this mode when you want to record high quality
images. Fine images are compressed to about 1/4.
STANDARD (STD) This is the standard image quality. Standard images
compressed to about 1/10.
To return to FN
Press EXIT.
Selecting the quality and size of image
data
3 4
MEM SET 1
STILL SET
BURST
QUALITY
IMAGESIZE
EXIT
RET. EXEC
FINE
STANDARD
REMAIN
12
RET. EXEC
MEM SET 1
STILL SET
BURST
QUALITY
IMAGESIZE
OFF
EXIT