Sony DCR-TRV38 - Manual (Page 106)

106
The POWER switch should be set to .
(1) Keep pressing PHOTO lightly and check the image. The green z indicator
stops flashing, then lights up. The brightness of the image and the focus are
adjusted and fixed while your camcorder targets at the middle of the image.
Recording does not start yet.
(2) Press PHOTO deeply.
Recording is complete when the bar scroll indicator disappears.
The image displayed on the screen when you pressed PHOTO deeply will be
recorded on the “Memory Stick.”
[a] Approximate number of images can be recorded on the “Memory Stick”
[b] Folder name to be recorded
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POWER
1
/ 12 FINE
640
[a]
2
FINE
640
[b]
101
101
Recording still images on “Memory
Stick” – Memory Photo recording