Sony DCR-TRV38 - Manual (Page 119)

119
“Memory Stick” Operations
Your camcorder can read moving picture data recorded on a tape and record it as a
moving picture on the “Memory Stick.”
Before operation
Insert the recorded tape into your camcorder.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press . The picture recorded on the tape is played back.
(2) Press again to pause playback at the scene where you want to start
recording from.
(3) Press START/STOP. Images and sound are recorded up to the remaining
capacity of the “Memory Stick.” See page 105 for details of recording time.
To stop recording
Press START/STOP.
Notes
• Sound recorded in 48 kHz is converted to one in 32 kHz when recording images from
the tape to the “Memory Stick.”
• Sound recorded in stereo is converted to monaural sound when recording from the
tape.
Titles
You cannot record the titles.
If the “ AUDIO ERROR” indicator appears
Sound that cannot be recorded by your camcorder has been recorded. Connect the A/V
connecting cable to input images played back on an external device (p. 120).
Recording date/time
The date/time when it is recorded on the “Memory Stick” are recorded. Various
settings are not recorded.
Recording a picture from tape as a
moving picture
3
1,2
320
50min
REC
BBB
N
15sec
0:00:03
0:15:42:43
101
[b]
[a]
[c]
[a] Available recording time on the “Memory Stick”
[b] This indicator appears for five seconds after pressing START/STOP. This indicator is
not recorded.
[c] Folder name to be recorded