Quickly locating a scene – zero set memory – Sony DCR-TRV38 User Manual

Page 71

Advertising
background image

71

Advanced Playback Operations

Your camcorder automatically searches for a desired scene having the tape counter
value of “0:00:00.” Use the Remote Commander for this operation.

The POWER switch should be set to

.

(1) During playback, press ZERO SET MEMORY on the Remote Commander at

the point you want to locate later. The tape counter shows “0:00:00,” then starts
counting. If the indicators do not appear, press DISPLAY. The ZERO SET
MEMORY indicator flashes.

(2) Press x when you want to stop playback.
(3) Press m to rewind the tape to the tape counter’s zero point. The tape stops

automatically when the tape counter reaches approximately zero.

(4) Press N. Playback starts from the counter’s zero point.

Notes
• When you press ZERO SET MEMORY before rewinding the tape, the zero set memory

function will be canceled.

• There may be a discrepancy of several seconds between the time code and the tape

counter.

• The ZERO SET MEMORY indicator disappears when you press FN.

If the tape has a blank portion in the recorded portions
The zero set memory function may not work correctly.

Quickly locating a scene
– Zero set memory

ZERO SET MEMORY

DISPLAY

N

m

x

Advertising
This manual is related to the following products: