Quick start guide – recording on tape, Connecting the power cord, Inserting the cassette – Sony DCR-TRV38 User Manual

Page 8

Advertising
background image

Quick Start Guide

8

Quick Start Guide – Recording on tape

Connecting the power cord

Use the battery pack when using your camcorder outdoors (p. 15).

AC Adaptor (supplied)

Connect the plug with its v mark facing up.

Open the DC IN jack cover.

To eject the cassette

Follow the procedures above, and take out the cassette after the cassette compartment
opens completely in step 3.

Note
Do not press the cassette compartment down forcibly. Doing so may cause a
malfunction.

Inserting the cassette

4

3

2

1

Fastening the grip belt
Fasten the grip belt firmly.

How to hold
your camcorder

1

Slide

OPEN/

EJECT in the
direction of the arrow
and open the lid.

2

Push the center of the
cassette back to insert
the cassette. Insert the
cassette straight as far
as possible into the
cassette compartment
with the window
facing up.

3

Close the cassette
compartment by
pressing

on the

cassette
compartment.
After the cassette
compartment goes
down completely,
close the lid until it
clicks.

Advertising
This manual is related to the following products: