Selecting a flash mode – Sony DSC-U40 User Manual

Page 23

Advertising
background image

23

S

hoo

ting st

ill

im

ages

,

Select [ON] with the control
button

v

, then press EXEC.

When you press MENU, the menu
disappears and the

(self-timer) indicator

appears on the LCD screen.

,

Center the subject in the LCD
screen and press the shutter
button fully down.

The self-timer lamp flashes red and a
continuous beep sounds. The image will be
shot after approximately 10 seconds.

To cancel the self-timer in the middle
of the operation

Close the lens cover or press POWER to
turn off the power.

•

If you press the shutter button while standing in
front of the camera, the focus and the exposure
may not be correctly set.

3

10

101

SELFTIMER

O N

O F F

2M

2M

2M

EXEC

/

4

10

101

2M

2M

2M

Self-timer
lamp

Selecting a flash mode

,

Set the mode switch to

, and

press the control button

v

( )

repeatedly to select a flash
mode.

Each time you press v ( ), the indicator
changes as follows.

No indicator (Auto):

Based on the

lighting conditions, the camera will decide
if there is enough light, and will use the
flash accordingly.

(Red-eye reduction):

Flash mode is

set to Auto, and the red-eye reduction
operates if the flash strobes.

(Forced flash):

The flash strobes

regardless of the surrounding brightness.

(No flash):

The flash does not strobe.

10

101

2M

2M

2M

Advertising