Writing audio data to a cd-r/cd-rw disc, 102 writing audio data to a cd-r/cd-rw disc – Sony MZ-M100 User Manual

Page 102

Advertising
background image

102

Writing audio data to a CD-R/CD-RW disc

You can write tracks in My Library

of SonicStage to a CD-R/CD-RW disc. Analog tracks

recorded on a Hi-MD device and imported to My Library can be written to and enjoyed on
a CD-R/CD-RW. The number of times data can be written may be limited due to copyright
restrictions.

1

Point to [Transfer

] on the upper-right side of the screen, and then select the

type of CD to be created.

To create an audio CD, select [Create an Audio CD]. To create an ATRAC CD, select
[Create an ATRAC CD]. To create an MP3 CD, select [Create an MP3 CD].
ATRAC CDs can be played only on devices that support ATRAC CDs. MP3 CDs can
be played only on devices that support MP3 CDs.

2

Insert a blank CD-R/CD-RW disc into the disc drive of your computer.

Use a CD-R/CD-RW with a recording capacity of 650MB or 700MB. Data may not be
correctly written if a disc of another capacity is used.

3

Select the albums or tracks to be written to the CD-R/CD-RW disc by clicking
them in the My Library list on the left side of the screen

.

By double-clicking an album, you can see a list of the tracks on the album and select
the tracks you want.

The My Library list

[Transfer ]

The tentative list
of items to be
written to the
CD-R/CD-RW
disc

Operation Status
Display

Advertising
This manual is related to the following products: