Sony COM-2 - Manual (Page 16)

1
COM-2.US.3-213-854-11(1)
 Select a wireless
network to which
to connect
Tap the wireless
network name to
register.
Note

Be careful to use only networks that you trust.
When you use a wireless network that does not require a security
encryption key, you can skip the following set up procedure.
When you tap “network name,” the unit starts to register the wireless
network.
If no wireless network name is displayed

If the unit does not detect any network, no network names are
displayed.
This means the unit is not in a good wireless reception area, or the
networks in the area are not broadcasting the network names
(SSID’s). Change your location to a better reception area, and tap
“Scan” to search for a wireless network. If the wireless network you
wish to connect to is not broadcasting the SSID, you can add the
wireless network manually by tapping “New.”
If the “Connection Manager” is not displayed on the
screen

Perform the following:
1 Tap the INFO button
2 Tap the Connection Manager
Settings
2
Wireless network set up
2 3 1
Preparation Settings Registration