Selecting a flash mode – Sony DSC-U20 User Manual
Page 32
Advertising
32
Selecting a flash mode
,
Set the mode switch to STILL, and press
v
( ) on the control button repeatedly to
select a flash mode.
Each time you press v ( ), the indicator changes as
follows:
No indicator (Auto):
Based on the lighting
conditions, the camera will decide if there is enough
light, and will use the flash accordingly (factory setting).
r
(Red-eye reduction):
Flash mode is set to Auto,
and the red-eye reduction operates if the flash strobes.
r
(Forced flash):
The flash strobes regardless of the
surrounding brightness.
r
(No flash):
The flash does not strobe.
1632
1632
1632
23
Advertising