Sony HCD-HDX678WF - Manual (Page 47)

47 US
Ge
tting Star
te
d
[OFF]: The system does not output
progressive signals. Select this setting
when:
– your TV does not accept progressive
signals, or,
– your TV is connected to jacks other than
the COMPONENT VIDEO OUT jacks.
[ON]: The system outputs progressive
signals. Select this setting when:
– your TV accepts progressive signals,
and,
– the TV is connected to the
COMPONENT VIDEO OUT jacks.
When you select [ON], the confirmation
display appears. Follow the Steps below.
8
Press C/c to select [START], then
press .
The system outputs the progressive signal
for 5 seconds. Check that the screen is
displayed correctly.
9
Press C/c to select [YES], then press
.
The system outputs the progressive signal.
When you select [NO], the system does not
output the progressive signal.
Step 6: Enjoying Sound
from all the Speakers
You can enjoy DVD, TV, or VCR sound from
all the speakers in this system.
1
Press FUNCTION +/– repeatedly until
the desired function appears in the
front panel display.
Each time you press FUNCTION +/–, the
function changes as follows.
“DVD” t “TUNER FM” t “TUNER
AM” t “TV” t “SAT/CABLE” t
“DMPORT” t “AUDIO” t …
Function Source
“DVD” Disc that is played by the
system
“TUNER FM”/
“TUNER AM” FM/AM radio (page 77)
“TV” TV
“SAT/CABLE” Component that is
connected to the SAT/
CABLE jacks on the rear
panel
“DMPORT” DIGITAL MEDIA PORT
adapter (page 83)
“AUDIO” Portable audio source (that
is connected to the AUDIO
IN jack on the front panel)
SYSTEM
MENU
X/x/c,
FUNCTION
+/–