Sony HCD-HDX678WF - Manual (Page 75)

Dis
c
75 US
[L/R] 3.00 m/10 ft 2)3) : Set the front speaker
distance.
[CENTER] 3.00 m/10 ft
2)3)4) : Set the center
speaker distance.
[SUBWOOFER] 3.00 m/10 ft
2)3) : Set the
subwoofer distance.
1) 0.00 to 7.01 meters for North American models.
2) When you perform the Quick Setup (page 44), the
default settings are changed.
3) 3.04 m/10 ft for North American models.
4)
This item appears when you set [CENTER] to [YES]
in the [CONNECTION] setting.
x [DISTANCE (SURROUND)]
When you move the surround speakers, be sure
to set the parameters of the distance (B) from
the listening position to the speakers.
You can set the parameters from 0.00 to 7.00
meters
1)
(0 to 23 ft).
[L/R] 3.00 m/10 ft 2)3)4) : Set the surround speaker
distance.
1) 0.00 to 7.01 meters for North American models.
2) When you perform the Quick Setup (page 44), the
default settings are changed.
3) 3.04 m/10 ft for North American models.
4)
This item appears when you set [SURROUND] to
[YES] in the [CONNECTION] setting.
Note
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
recommended range, / ** m is displayed (**
being the number). indicates over the
recommended distance. indicates below.
x [LEVEL (FRONT)]
You can adjust the sound level of the front
speakers, center speaker, and subwoofer. You
can set the parameters from –6.0 dB to +6.0 dB.
Be sure to set [TEST TONE] to [ON] for easy
adjustment.
[L/R] 0.0 dB: Set the front speaker level.
[CENTER] 0.0 dB
* : Set the center speaker
level.
[SUBWOOFER] +2.0 dB: Set the subwoofer
level.
* This item appears when you set [CENTER] to
[YES] in the [CONNECTION] setting.
x [LEVEL (SURROUND)]
You can adjust the sound level of the surround
speakers. You can set the parameter from –6.0
dB to +6.0 dB. Be sure to set [TEST TONE] to
[ON] for easy adjustment.
[L/R] 0.0 dB * : Set the surround speaker level.
* This item appears when you set [SURROUND] to
[YES] in the [CONNECTION] setting.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]: The test tone is not emitted from the
speakers.
[ON]: The test tone is emitted from each speaker
in sequence while adjusting level. When you
A
B