Sony HCD-ZX9 - Manual (Page 26)

26 US
You can select the power illuminator as you
want.
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator changes cyclically as follows:
PATTERN 1 t PATTERN 2 t PATTERN 3
t PATTERN 4 t PATTERN OFF
When X-ROUND mode is selected
Each time you press the button, the power
illuminator changes cyclically as follows:
X-PATTERN* y PATTERN OFF
* The power illuminator will synchronize with the
selected X-ROUND effect.
Notes
• When you turn VOLUME +/– (or press
VOLUME +/– on the remote), power illuminator
shows the current volume level.
• During the demonstration display, you can turn on or
off power illuminator by pressing ILLUMINATION.
1
Press AMP MENU repeatedly to select
“SPECTRUM”.
The last selected spectrum appears in the
display.
2
Press < or , repeatedly to select the
setting you want.
The display changes as follows:
When X-ROUND mode is selected
The display changes as follows:
X-POSITION* y SPECTRUM OFF
* The spectrum analyzer display will synchronize with
the selected X-ROUND effect.
3
Press ENTER.
1
Press AMP MENU repeatedly to select
“DIMMER”.
The last selected dimmer appears in the
display.
2
Press < or , repeatedly to select the
setting you want.
The display changes as follows:
* DIMMER 3 is the darkest.
3
Press ENTER.
Changing the power
illuminator Changing the spectrum
analyzer display
Adjusting the brightness
of the display
SPECTRUM 1
Y
SPECTRUM OFF
R
SPECTRUM 2
Y
SPECTRUM 3
R
T t
t SPECTRUM 4 T
t DIMMER 1 y DIMMER 2 T
t DIMMER 3* T