Sony DSC-TX1 - Manual (Page 134)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
134 GB
A connection cannot be established.
• The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with PictBridge or
not.
• Check that the printer is turned on and can be connected to the camera.
• Set [USB Connect] to [PictBridge] (page 102).
• Disconnect the cable for multi-use terminal and connect it again. If an error message is indicated on
the printer, refer to the operating instructions supplied with the printer.
Cannot print images.
• Check that the camera and the printer are properly connected using Cable for multi-use terminal.
• Turn on the printer. For details, refer to the operating instructions supplied with the printer.
• If you select [Exit] during printing, images may not be printed. Disconnect the cable for multi-use
terminal and connect it again. If you still cannot print your images, disconnect the cable for multi-use
terminal once more, turn the printer off and then turn it on, and connect the cable again.
• Movies cannot be printed.
• Images shot using other cameras, or images modified with a computer may not be printed.
• Panoramic images may not be printed depending on the printer or may print in cut off panoramic
image.
Printing is canceled.
• The cable for multi-use terminal has been disconnected before the (PictBridge Connecting)
indicator was turned off.
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to whether the
printer provides these functions or not.
• The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
• The image does not have the recording data so the date cannot be inserted. Set [Date] to [Off] and
print the image again (page 124).
Cannot print the image at the size selected.
• When you replace the printer paper with paper of a different size after connecting the printer to the
camera, disconnect the cable for multi-use terminal connected to the printer and then reconnect the
printer.
• The print setting of the camera differs from that of the printer. Change the setting of either the camera
(page 124) or the printer.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time depending on
the printer.
PictBridge-compliant printer