Burst, About the recording of burst shooting images – Sony DSC-TX1 User Manual

Page 45

Advertising
background image

Ta
ble
of

co
nte
n

ts

Op
e

rat

io

n

S

ear

ch

MENU/Settin

g

s

Se
ar

ch

In

de
x

45

GB

Burst

The camera shoots up to 10 continuous frames in one burst when you hold down the shutter
button.

1 Lower the lens cover to switch to shooting mode.

2

(Burst)

t desired mode

When the buttons are not displayed on the left side of the LCD
screen, touch

.

• Burst mode is not available for Sweep Panorama, Movie Mode, Anti Motion Blur, Hand-held Twilight,

Smile Shutter or Easy Mode.

• The flash is set to [Off].
• When recording with the self-timer, a series of a maximum of five images is recorded.
• In slow shutter speed conditions, the burst of shots per second may be decreased.
• The recording interval becomes longer, depending on the setting for the image size.
• [VGA] image size will be set while recording on internal memory.
• When the battery level is low, or when the internal memory or a “Memory Stick Duo” media is full, the

burst stops.

• The focus, white balance, and exposure are adjusted for the first image, and these settings are also used

for the other images.

(Off)

Records a single image.

(High)

Shoots up to 10 images in succession.

(Mid)

Shoots up to 5 images in succession.

(Low)

Shoots up to 2 images in succession.

Notes

z

About the recording of burst shooting images

After shooting burst images, the shot images are displayed in frames on the LCD screen.
When all the images are fitted in the frames, recording is completed.
You can stop the recording by touching [Cancel recording]

t [OK].

When stopped, the image displayed in index and images in the image processing are
recorded.

Advertising