Initializing a disc, What is initialization – Sony MVC-CD350 User Manual
Page 19
19
S
hoo
ting st
ill
im
ages
Initializing a disc
What is initialization?
Initialization is required to record images
on a disc.
When you perform finalization (page 75)
using your camera to view images through
a CD-ROM drive, initialization is also
automatically performed, and you can
continue to record images. Images recorded
before finalization remain on the disc.
,
Insert a new disc and set the
mode dial to
, then turn on
the power.
“Initialize Place on level surface” appears
on the LCD screen.
To cancel initialization
Select [Cancel] with
V
on the control
button, then press
z
. After canceling the
initialization, open and close the disc cover,
then perform the procedure from step 1.
•
You can also carry out this operation when the
mode dial is set to
, SCN or
.
•
You can also perform initialization using
(Disc Tool 1)
in the SET UP settings
,
Select [OK] with
v
on the
control button, then press
z
.
Initialization starts. Do not shake or strike
the camera during initialization.
1
Mode dial
1
2
Initialize
Avoid any vibration
Ready to initialize
Initialize
Avoid any vibration
Initialize in progress
Initialize
Initialize complete