Sony MVC-CD350 - Manual (Page 94)

94
Disc
The image cannot be
played back through the
CD-ROM drive of your
computer. • The disc has not been finalized.
• Vibration caused an error during recording.
• The CD-ROM drive does not support the packet-
write system.
• The CD-ROM drive does not support the
MultiRead.
• The disc may be scratched or dirty.
—
p Finalize the disc (page 75).
p You may be able to view the image if you connect the camera to
your computer with the USB cable.
p Consult the computer or the CD-ROM drive manufacturer.
p Consult the computer or the CD-ROM drive manufacturer.
p Clean the disc if the disc is dirty. When the disc is scratched
replace the disc.
p Causes not described above have occurred, consult the
computer or software manufacturer.
The image and sound are
interrupted by noise when
you view a movie on a
computer. • You are playing back the file directly from the
disc .
p Copy the file to the hard disk of your computer and then play
back the file from the hard disk.
You cannot print an
image. —
— p Check the printer settings.
p Click on HELP for the “ImageMixer Ver. 1.5 for Sony”
application software.
An error message appears
when you set the supplied
CD-ROM in your
computer. • The computer display is not set correctly. p Set the computer display as follows:
Windows: 800 × 600 dots or more
High Color (16 bits, 65,000 colors) or more
Macintosh: 800 × 600 dots or more
32,000-color or more
Symptom Cause Solution
Symptom Cause Solution
You cannot record on a
disc. • The disc is full.
• The disc is not initialized.
• The disc is not placed correctly.
p Replace it with a new one. Format the disc when using a CD-
RW.
p Initialize the disc (page 19).
p Place the disc correctly in the disc tray (page 18).